Environmental consultancy for planning & development0330 236 7329hello@acp-consultants.com

ACP bat ecology guide · Trees, roosts & better design

Bats in trees:
roost features, surveys
& tree works

Understand the feature. Protect the roost. Design around the tree.

Bats in trees can be hidden behind a small bark plate or deep inside a branch cavity. This illustrated guide explains what those features mean, how an ecologist assesses them, and how a project can avoid harm before tree work begins.

Do bats live in trees?

Yes. Many British bats use tree cavities, cracks and sheltered spaces as roosts. They do not excavate a nest or chew a new hole. Instead, they occupy features formed by decay, damage, woodpeckers or the tree’s growth.

A tree can provide shelter, insect prey and a connection to feeding areas. Different trees may offer different conditions as weather, breeding status and season change. A single occupied tree may therefore be part of a wider roosting resource.

This guide is for landowners, architects, arborists and project teams. It explains the ecological decisions behind tree work; it does not provide instructions for inspecting cavities or carrying out work around bats.

Read the evidence: BCT: roosts in trees.

Six potential roost features to recognise

Six numbered examples of potential tree roost features: woodpecker hole, broken branch, crack, loose bark, old wound cavity and branch-union split.
Illustrative examples of potential roost features, or PRFs. The drawings show possible shelter, not confirmed roosts or a scale-based identification key.
© 2026 ACP Consultants Ltd.
Original educational illustration

01 · Woodpecker hole

An entrance may lead to a chamber that cannot be judged from its opening alone.

02 · Broken branch stub

Damage and decay can leave sheltered space within a branch or trunk.

03 · Crack or split

A narrow opening may continue further into the wood than is visible from below.

04 · Loose bark

The sheltered space behind an attached bark plate can provide a crevice roost.

05 · Old wound cavity

A hollow behind woundwood may offer space beyond the visible entrance.

06 · Branch-union split

A split at a fork can form a sheltered feature; not every fork contains a cavity.

Dense ivy can also obscure the underlying tree and complicate an assessment. Do not pull it away, lift bark or probe a hole to check. Record what can be observed safely and let a suitably experienced ecologist resolve the uncertainty.

A small entrance does not reveal the whole roost

The useful space is inside the feature. An entrance may open into an upward chamber, a long fissure or a shallow gap behind bark. Conversely, an impressive-looking opening may be wet, exposed or too shallow to offer suitable shelter.

Depth, shelter, wood thickness and exposure influence conditions within a feature. The surrounding canopy also changes sunlight and wind exposure. As a result, pruning neighbouring branches can alter a roost even when the entrance itself remains untouched.

A technical assessment records what was seen, what remains hidden and how confidently the feature can be described. Photographs help explain its location, but a ground photograph alone rarely resolves its internal extent.

Which British bats use tree roosts?

Species differ in their roost choices, and local availability matters. These examples explain ecological tendencies; they are not a field key for identifying the occupants of a particular tree.

Noctule

A strongly tree-associated species that can use holes for breeding and winter shelter. Retaining several suitable trees matters because a colony may change roosts.

Bechstein’s bat

A woodland specialist associated with tree cavities, including woodpecker holes. A group of suitable trees and the woodland around them can be more important than one isolated feature.

Barbastelle

Frequently associated with sheltered crevices and loose bark. Features can be short-lived, so maintaining a continuing supply of suitable trees is important.

Natterer’s & brown long-eared bats

Both can use trees as well as other roost types. Their woodland use also highlights the importance of feeding habitat and connected vegetation.

Pipistrelles and other species may use trees too. For species profiles, seasonal behaviour, anatomy and attributed recordings, explore our British bats guide.

Why protecting one tree may not be enough

Roost switching is part of normal ecology

Russo and colleagues studied barbastelles in an old beech forest in central Italy. They found that females could retain social associations while moving between roosts. Group size and roost mates helped explain thermoregulation.

Practical implication: an apparently empty feature on one visit may still belong to a used roost network. Retention should consider alternative shelters and the routes between them.

Limit: this was a study of one species in a particular forest, not a universal timetable for British bats.

Tree preferences depend on the setting

Rachwald and colleagues radio-tracked 24 barbastelles and 13 soprano pipistrelles over three breeding seasons in Poland’s Białowieża Forest. They located 48 and 15 roosts respectively. Barbastelles mainly used dead spruce; pipistrelles predominantly used broadleaved trees.

Practical implication: examine the available features and local ecology rather than assuming that only a favoured tree species matters.

Limit: these findings describe a particular lowland forest and sampled animals. They do not provide a UK minimum tree diameter or a development buffer.

Tree categories and feature categories are different

The BCT fourth-edition framework separates the assessment of a tree from the suitability of a particular feature. That distinction makes reports clearer and prevents a potential maternity feature being mistaken for a confirmed maternity roost.

Plain-language explanation of BCT Table 4.2; apply with professional judgement.
Tree-level termWhat it meansWhat the project team should understand
NONENo potential features identified, or their presence judged very unlikely.A recorded assessment with stated limitations, not a permanent guarantee.
FARFurther assessment is required to establish whether features are present.Uncertainty still needs resolving; it does not mean the tree is clear for work.
PRFAt least one potential roost feature is present.The feature and the proposal need closer consideration.

PRF-I · individual or very small numbers

This feature category concerns suitability for an individual or very small number of bats, considering the feature and habitat context. It does not mean that bats are absent or that work is automatically permitted.

PRF-M · multiple bats

This category indicates suitability for multiple bats, potentially including a maternity group. It describes potential. Occupancy, species and roost function require supporting evidence.

An ecologist may revise an initial category after a closer inspection. The report should explain the evidence behind that change. Do not simply transfer the low, moderate and high building categories onto the tree framework.

How is a tree assessed for bats?

1 · Ground-level assessment

The ecologist relates the trees to the proposal, examines visible features and records constraints. Leaf cover, height, ivy and viewing angles can limit what can be concluded. A map should connect each tree identifier to its features.

2 · Close inspection where justified

A closer inspection may clarify a feature’s extent and suitability. Access could involve trained climbing specialists or suitable access equipment, subject to safety, competence and any necessary licence. A fragile feature must not be damaged by the investigation.

3 · A targeted evidence plan

Where uncertainty still matters to the proposal, the ecologist selects a proportionate method. This may involve repeated feature inspections, emergence observation or specialist landscape-scale work. Each method should answer a defined question.

Trees are not simply small buildings. The number of openings, changing foliage, canopy clutter and hidden exits can make observation difficult. An emergence survey may be appropriate where a feature cannot be inspected safely or fully, or to characterise a known roost.

An activity detector records bats passing its position. It does not establish that every nearby cavity is empty. Likewise, hearing bats beside a tree does not by itself prove that they emerged from that tree.

The report should distinguish an observed emergence, an inspected feature and an acoustic record nearby. If the method leaves a relevant area unseen, the limitation should remain visible in the conclusion. More visits are useful only if they improve the evidence needed for the decision.

Does every potential feature need emergence surveys?

No. First establish whether impacts can be avoided. Where an impact remains, the approach depends on the feature, local context, scale of work and evidence already available. A blanket survey package is not a substitute for that assessment.

BCT describes a roost-resource approach for appropriate situations involving only PRF-I features. This combines advance compensation and a precautionary working method rather than automatically requiring further surveys. It is a professional decision, not a self-service clearance route; the number and landscape importance of the features still matter.

For PRF-M features, the guideline’s summer close-inspection approach is three visits between May and September, including at least two between May and August. Visits should normally be at least three weeks apart. Weather, geography, access and the ecological question can affect the design.

Can a design change avoid the impact?

Often, this is the most useful question to ask early. A proposal that retains a tree, protects its features and preserves its connections may need a different evidence package from one that removes it. Avoidance must address indirect effects too.

  • Move a building, access route or working area away from a sensitive tree group.
  • Review whether the affected branch genuinely needs to be removed.
  • Keep lighting away from roost access and connected vegetation.
  • Coordinate drainage, services, storage and construction access with tree retention.

These options need joint review by the designer, arborist and ecologist. Root-protection distances and bat-related measures answer different questions; one should not be treated as a substitute for the other.

See our design-options guide for the wider principle: understand the impact before committing to additional work.

Conceptual development with mature trees and a connected hedgerow retained beside a building and an access route set away from them.
Conceptual avoidance option, not an ACP case study or an approved layout. Retained trees, connected vegetation and lighting kept near the building illustrate design questions. No fixed buffer or safe separation is implied.
© 2026 ACP Consultants Ltd.
Original educational illustration

Protect the roost and the way out

The feature

Keep the entrance and internal shelter functioning. Changes to the supporting branch, bark, canopy or nearby exposure can matter even where the trunk remains.

The connection

Review the vegetation and sheltered routes between the tree and feeding areas. A retained tree surrounded by new lighting or a widened open gap may function differently.

The longer-term resource

Consider future tree management, replacement planting and the development of new features. Young planting cannot immediately reproduce the shelter offered by old cavities.

A lighting brief should identify ecological receptors, operating periods and the surfaces or routes requiring protection. There is no single illuminance number that clears every tree-roost situation. Our bats and lighting guide explains how to coordinate the ecological brief and lighting design.

There is no universally safe month for tree work

Broad ecological context, not a work calendar. Timing varies with species, site and weather.
PeriodWhat may be happeningWhy the programme needs care
SpringBats become more active and may change roosts as conditions change.The absence of summer activity does not automatically establish absence in spring.
SummerSome features may support breeding groups and dependent young.Avoid disturbing a sensitive roost while gathering evidence or planning work.
AutumnMating, roost switching and preparation for winter can affect use.Autumn is not a blanket permission to remove potential features.
WinterSome species hibernate in trees; activity outside the roost may be limited.A quiet night or leaf-off inspection cannot alone rule out winter use.

Leaf-off conditions can improve the view of a tree’s structure. However, better visibility does not make every cavity accessible or reveal all occupants. The ecologist should distinguish the best time to map features from the best time to answer a question about their use.

The same tree can present different survey constraints across the year. Leaf cover may hide a high opening; poor weather may reduce activity; an unsafe branch may prevent close access. A programme should account for these limitations instead of treating a calendar month as a guarantee.

If the design changes or work is delayed, ask whether the earlier findings remain applicable. The relevant question is whether the evidence still supports the current operation.

Use our bat survey season guide for wider survey timing, then agree the tree-specific programme.

Felling, pruning and safety work: coordinate the advice

A recommendation to prune or fell a tree answers an arboricultural question. It does not automatically resolve protected-species requirements. The ecologist needs the actual proposed operation, not just a note that says “tree works”.

For example, crown reduction, removal of a damaged limb and complete felling can affect different features. Access machinery, temporary lighting and the treatment of retained sections also need to be considered where relevant.

Where a tree presents an immediate safety concern, keep people away from the affected area and obtain urgent professional advice. The arborist and ecologist should coordinate the risk response and any necessary authority involvement. Do not assume that a safety concern removes every legal requirement.

Our arborist–ecologist handover checklist covers document coordination. This guide supplies the ecological background behind that handover.

What protection applies to bats in trees?

In England, bats and their breeding and resting places are protected. Activities that damage a roost, obstruct access or unlawfully disturb bats can create an offence. Protection is not limited to the nights when bats are seen leaving.

Planning permission, tree consent and a bat mitigation licence serve different purposes. One does not automatically replace the others. Where impacts cannot be avoided, the ecologist must assess the appropriate licensing route and evidence needed before the relevant work.

This legal context follows Natural England’s guidance for England. Wales, Scotland and Northern Ireland have their own licensing authorities and procedures. The project location therefore matters.

Veteran trees, ash dieback and future roosts

Value the features, assess the risk

Old trees and standing deadwood can provide valuable habitat. At the same time, a damaged tree may present a real safety issue. Neither value nor risk should be inferred from appearance alone; competent arboricultural and ecological advice needs to be brought together.

Plan woodland work as a programme

Disease and storm damage can change the available roost resource. Map the work, record decisions and consider how a sequence of operations affects the wider woodland. Routine forestry and development projects may follow different consenting and assessment routes.

BCT’s current woodland resource brings together guidance on ash dieback, forestry operations and protected species. It also signposts the 2025 Bats and Woodland publication. Use the relevant national guidance and keep records of the information used to reach decisions.

Can bat boxes replace a tree roost?

A box may provide an additional opportunity or form part of a justified compensation design. However, installing boxes does not itself authorise the loss of a protected roost. Suitability, location, timing and the affected species all matter.

An established cavity has a particular microclimate, entrance and landscape setting. A manufactured box may behave differently and may not be occupied. Compensation should therefore explain the ecological function it aims to provide, how it will be secured and how success will be assessed.

Retention and impact avoidance come first. Where an agreed design includes compensation, consider maintenance, access, overheating risk and monitoring alongside the installation itself.

What should a useful tree-bat report explain?

The evidence

  • Tree and feature references on a clear plan.
  • Survey dates, methods and competence.
  • Features, observations and separate evidence of use.
  • Visibility, access and seasonal limitations.

The decision

  • The actual work or development being assessed.
  • Direct and indirect effects.
  • Avoidance options and remaining uncertainties.
  • Further evidence, permissions and work dependencies.

A useful report makes the next decision easier. It should explain why more evidence is needed, or why a proportionate avoidance or management approach is appropriate. If the layout, lighting or tree works change, check whether the conclusions still apply.

How ACP can help you plan the next step

Send us the tree survey or schedule, location plan, ecological reports and a clear description of the intended works. If there are photographs, link them to the tree identifiers and take them only from a safe position.

We can review the ecological question alongside your proposal, explain the evidence route and discuss options for avoiding impacts. Where specialist access, additional surveys or licensing input is needed, the scope and responsibilities should be agreed clearly.

Our starting point is not a predetermined package of extra visits. It is understanding what you want to do, what may be affected and whether a better design can resolve the issue.

For the wider service, see bat surveys. For the arboricultural scope, see tree surveys.

Bats in trees: your questions answered

Do bats nest in trees?

Bats roost in existing cavities and crevices. They do not build nests or excavate new holes. A woodpecker hole, split or sheltered bark feature may provide suitable space.

Can a small or young tree contain a bat roost?

Tree size alone cannot rule a roost out. The presence of a suitable feature, its context and the evidence matter. Older trees often provide more opportunities, but an assessment should not rely on age alone.

Does every hole mean bats are present?

No. A hole may be unsuitable or unused. The assessment must separate potential suitability from evidence of occupation, and then consider the effect of the proposed work.

What is a ground-level tree assessment?

An ecologist assesses the tree and its visible potential roost features from the ground. The record explains evidence and limitations. However, this differs from a tree condition survey or a closer inspection of a cavity.

What is the difference between FAR and PRF-M?

FAR is a tree-level category indicating that further assessment is required to establish whether features are present. PRF-M describes a particular feature suitable for multiple bats, potentially including a maternity group. They answer different questions.

Does PRF-I mean I can fell the tree?

No. It is a suitability category, not a work authorisation. An ecologist must consider the proposal, context and an appropriate evidence or precautionary approach, including any legal requirements.

Can I remove ivy or loose bark to check?

Do not remove or disturb material to look for bats. It may obscure or form part of a roost feature. Ask an appropriately experienced ecologist to assess the tree and the proposed work.

Will a detector beside the tree prove it is empty?

No. A detector samples sound at its location. Quiet bats, hidden exits and intermittent use can be missed. Passing activity also does not prove that bats roost in that tree.

Can tree work happen in winter?

Possibly, but winter is not a universal safe period. Some bats hibernate in trees. The appropriate timing and method depend on the feature, species, evidence and proposal.

Could a design change reduce the need for further surveys?

Yes, where it genuinely avoids relevant impacts. Retaining the tree alone may not be enough if lighting, access or habitat connections change. The ecologist should record why the revised proposal supports a different evidence requirement.

Is a bat box enough compensation?

Not automatically. A box must serve a defined ecological purpose within an agreed design. It does not replace a licence where one is needed or guarantee that the lost roost function will be recreated.

What if the tree is dangerous?

Keep people away from the affected area and seek urgent arboricultural and ecological advice. The response should address safety and protected species together. Do not use a general website guide as permission for a particular operation.

Guidance and research behind this page

Reviewed on 15 November 2026. Professional guidance informs the survey framework; research helps explain ecological behaviour. Neither removes the need for a site-specific judgement.

Professional guidance

Primary research and further reading

For the feature-identification literature, Bat Roosts in Trees (Bat Tree Habitat Key, 2018) is specialist further reading. It offers a route into the specialist tree-roost literature.

The illustrations are original educational artwork. They are not survey photographs, measured tree sections or evidence from an ACP project.

Bring the design and ecology together

Planning work around trees?

Share the proposal early so the next step addresses the real impact and the information you already have.