Planning roof works, a barn conversion, tree works or new external lighting? ACP’s bat ecologists help you establish the evidence your proposal needs, agree the survey scope and understand the next steps.
Tell us where the site is, what you plan to change and whether the council has requested ecological information. We will then explain the next step and provide a scoped quotation.
01Start early. An initial assessment can help you plan seasonal work.
02Ask the right question. Roost and landscape surveys have different purposes.
03Know the next step. Findings should inform decisions, not just produce a report.
A clear starting point
Do your proposed works need bat evidence?
Bat survey evidence helps establish whether your proposed works could affect bats, their roosts or the habitats they use. For example, roof alterations, demolition, barn conversions, tree works and lighting changes can raise different ecological questions.
First, review the proposal before booking fieldwork. The right starting point depends on the affected features, existing evidence and any planning request.
Different methods answer different ecological questions. Building inspections, emergence surveys, tree assessments and habitat activity surveys each provide distinct evidence. Therefore, some projects need more than one method.
What do your proposed works affect?
A building inspection is often the starting point. A Preliminary Roost Assessment reviews accessible features and signs of bats. Its findings then determine whether seasonal evidence is needed.
Start with the exact trees and proposed operations. A ground-level tree assessment considers potential roost features. Closer inspection or further surveys may be needed. However, a category alone is not clearance to fell.
Consider how bats use the wider site. Activity evidence can therefore inform habitat retention, connections and lighting design. It answers a different question from investigating a particular roost.
You do not need to select a survey before contacting us. Instead, share the site, drawings, intended works and any council request. We can help define the assessment question and proposed scope.
Works may affect winter roost use or potential hibernation features.
Site-specific winter evidence, limitations and further investigation where needed.
Programme the right evidence
When can bat surveys take place?
The bat year helps explain why different surveys need different seasons. Use this calendar to plan ahead, then let ACP help define the right programme for your site.
Maternity colonies & youngTypically May–AugustColonies form in late spring; pups develop through summer.
Colonies · pups · young
Mating & winter preparationLate summer into autumnMating, movement and fat-building overlap; timing varies.
Mating & feeding
Spring brings a change of pace. Feeding and movement increase on warmer nights. In summer, females usually rear a single pup, which develops flight and feeding skills before becoming independent.
Indicative survey windows in England
Your site determines which investigations are needed
Preliminary Roost AssessmentAny time of yearInitial building inspection.
Initial inspection · year-round
Ground-level tree assessmentYear-round · leaf-off preferredVisibility is often best around December–March.
Leaf-offLeaf-off
Summer-roost / emergence surveysMay–August · September conditional*Agree seasonal coverage for the roost question.
May–AugustSep*
Foraging & commuting surveysApril–OctoberCover the relevant spring, summer and autumn behaviour.
April–October
Hibernation investigationsNovember–mid-MarchSpecialist winter evidence where relevant.
Jan–Feb½Nov–Dec
Swarming investigationsAugust–OctoberA specialist investigation where the site and brief require it.
August–October
* September emergence surveys: suitable for some programmes, depending on location and conditions. However, appropriate summer coverage remains important for maternity evidence.
ACP can help turn these indicative windows into a programme for your site. Species, weather and roost conditions affect exact dates. In addition, the programme for works needs to address roost protection and any licensing requirements.
A building inspection differs from a programme of seasonal visits or wider habitat surveys. Your quotation should therefore distinguish the initial work from any follow-up. Our quotation comparison checklist explains what to check before choosing a survey provider.
Emergence surveys, specialist access, additional reporting and licensing support should be identified where relevant.
Site: buildings, trees, features and access arrangements.
Fieldwork: methods, coverage, visits and seasonal requirements.
Deliverables: reports, recommendations and agreed follow-up support.
A building Preliminary Roost Assessment (PRA) examines accessible features and signs of bats. It also records inspection limitations. The findings may establish roost use or show why further investigation is needed. However, finding no signs in accessible areas does not, by itself, demonstrate absence.
Dusk emergence surveys investigate bat use of particular roost features. Ecologists plan coverage of potential access points and record conditions and limitations. Suitable infrared or thermal night-vision aids also support observation after dark.
We interpret field observations alongside reviewed night-vision footage and relevant acoustic recordings. This helps distinguish bats leaving a feature from bats passing nearby. We also explain how visibility, access and other limitations affect the assessment.
Equipment supports experienced judgement. However, it does not make every survey conclusive or remove the need for appropriate seasonal coverage. For access and coordination, see our emergence survey preparation checklist.
A ground-level tree assessment identifies potential roost features before proposed tree works. For example, features may suit individual or very small numbers of bats (PRF-I), or multiple bats including maternity use (PRF-M).
Ground-level findings are preliminary. Closer inspection and further surveys depend on the features, access and proposed works. However, a PRF-I category does not give permission to fell. The assessment must establish the resource and appropriate precautions.
A bat assessment and an arboricultural survey answer different questions. Therefore, coordinate their findings and share the exact felling or pruning schedule. Our arborist–ecologist handover guide explains the practical information exchange.
Night-time walkovers and static detectors investigate how bats use the wider site for feeding and movement. However, acoustic records need interpretation: recorded passes do not directly count individual bats or identify every roost.
Findings can inform protection of roost entrances, movement routes and feeding habitat. Therefore, coordinate lighting design with the ecological assessment; retaining a feature alone may not protect it from illumination.
Where winter roost use could be affected, a separate assessment may be needed. Hidden crevices can limit inspection, so further evidence or a precautionary approach may be appropriate.
These anonymised examples draw on ACP survey reports. They show how the evidence and proposed works shape the next step.
These examples describe report findings and recommendations. They do not claim planning approval, completed mitigation or measured success after development.
Separating nearby activity from a building roost
For a proposed house extension, ACP completed two dusk emergence surveys following an earlier assessment by another consultant. Bats fed and travelled nearby, but the observations and reviewed infrared footage recorded no emergence or re-entry from the assessed building.
The report concluded that a roost was likely absent at the time of survey. It also recommended limiting light spill onto nearby vegetation. However, the finding about the building did not remove the need to consider surrounding habitat.
Refining the scope when loft access becomes available
On a proposed building conversion, an inaccessible loft left a gap in the initial assessment. ACP then inspected it before the first dusk visit and found no bat evidence or additional features.
As a result, the team refined the programme for that building section from three emergence visits to two. The completed report concluded likely absence of roosting bats. It recommended sensitive lighting and habitat enhancements. The scope decision reflected this site’s evidence and access.
Looking beyond the absence of visible signs
During a building assessment, ACP recorded potential access points and crevice features despite finding no droppings or feeding remains. The building was assessed as having moderate roost suitability, and the report recommended two emergence surveys.
However, this was an initial assessment, with further evidence still needed. It shows why the condition of roof features and the proposed works matter alongside visible signs.
Bat surveys are a type of protected species assessment within wider ecology surveys. In England, all bat species and their breeding sites and resting places are legally protected.
The main protections come from the Conservation of Habitats and Species Regulations 2017 and the Wildlife and Countryside Act 1981. Relevant offences include:
Deliberately capturing, injuring or killing bats.
Damaging or destroying a breeding site or resting place, including when bats are absent.
Deliberately disturbing bats in ways covered by the Habitats Regulations.
Intentionally or recklessly disturbing bats in their shelter or obstructing access to it.
However, planning permission does not replace wildlife licensing. If bats are unexpectedly found during works, stop the affected activity and seek ecological advice before continuing.
Interpret the evidence against the proposed works. For example, bat activity over a site and a confirmed roost may have different implications.
Avoid harm first.Review layout, access, lighting, materials and timing to retain important features.
Mitigate remaining effects.Design appropriate measures and agree how they will be implemented and checked.
Compensate as a last resort.Where needed, provide suitable replacement resources and proportionate monitoring.
Biodiversity net gain does not replace protected-species duties. Therefore, survey evidence, project design and any necessary licence conditions must work together.
Why work with ACP?
Bat ecology connected to your project
Our in-house team includes Level 1 and Level 2 bat survey licence holders, with specialist partner support at Levels 3 and 4 where required. We therefore match the survey method and project to the appropriate expertise and authorisation.
Bat findings can inform wider ecology advice and the project’s tree or design information. Ecological Impact Assessment (EcIA) considers ecological effects. Where a proposal needs a wider Environmental Impact Assessment (EIA), bat evidence may inform its ecology chapter.
Support across England
Share your site address so we can confirm the scope and practical arrangements. Local planning requests and site conditions should inform the brief.
This page provides general guidance for England. Your site, proposal and existing evidence determine the appropriate advice.
Common questions
Bat survey FAQs
Do I need a bat survey for planning permission?
Not always. A survey may be needed if proposed works could affect bats, their roosts or important foraging and commuting habitats. The evidence depends on the works, site features and existing reports. If the risk is uncertain, ask an ecologist to review the proposal.
Do I need a bat survey to replace my roof?
Roof repairs or replacement can affect bat roosts in tiles, eaves and roof voids. Whether a survey is needed depends on the features and proposed works. Wildlife protection still applies when planning permission is not required. Share your roof-work plans with ACP so we can advise on the appropriate starting assessment.
Can I arrange a bat survey in winter?
You can arrange a PRA throughout the year. However, that inspection does not replace seasonal evidence needed for a different question. Hibernation investigations have their own scope.
Can I complete all the work in one visit?
Sometimes the initial assessment resolves the commissioned question. Other projects need further visits or a different method. The scope should explain the uncertainties before you book.
Does a lack of droppings mean there is no roost?
Not necessarily. Interpret inspection findings alongside the features, access, timing and limitations. An absence of visible evidence is not an automatic clearance for works.
Can thermal cameras replace the usual survey programme?
Equipment can support appropriate surveys, but it does not remove the need for suitable methods, coverage and interpretation. Technology must be selected for the site and question.
How long is a bat survey valid for?
There is no universal expiry date. Suitability depends on the data, site changes and the purpose of the assessment. For planning, Natural England normally expects surveys from the most recent appropriate season. Send ACP your report and current plans, or read our bat survey report validity guide.
Does planning permission allow me to disturb a roost?
No. Planning and wildlife licensing address different requirements. Get advice before work that could affect bats or their roosts.
What should I send when requesting a quote?
Send the site postcode or address, a description of the works and your planning stage. Current drawings, earlier reports and the council’s exact request are helpful too.
Start with the information you have
Get a clear scope for your bat survey
Share your site, proposed works and any council request.
We will then review the enquiry and explain the proposed initial assessment, any seasonal requirements and the information needed to move forward.