Environmental consultancy for planning & development0330 236 7329hello@acp-consultants.com

ACP technical guide · From fieldwork to sound decisions

Bat survey guidelines
& methods explained

The right question. The right evidence. A clear next step.

Bat survey guidelines help ecologists choose reliable ways to investigate roosts, flight routes and feeding habitat. This guide explains how methods fit together, why coverage matters, and what infrared cameras, thermal imaging and acoustic detectors can actually tell you.

Which bat survey guidelines apply?

Use the current professional guidance alongside the site, the proposed work and the decision that needs evidence. This is a guide to the reasoning behind a survey design, rather than a replacement for the full publications.

The main survey framework

BCT’s fourth edition remains the main professional survey reference. It covers survey design, buildings, trees, emergence, habitat activity and specialist methods. The publicly available text includes amendments dated March 2024.

Read its recommendations in context. A table entry cannot capture every site constraint or ecological question.

Night vision: the 2026 addition

BCT has also published a dedicated Night Vision Aids technical guide. Its public overview stresses equipment limitations, appropriate settings, data storage and fieldcraft.

Those principles matter throughout this chapter. We identify the public overview as our source; practitioners should consult the full guide for detailed procedures.

Research checked: 15 November 2026. The references below distinguish guidance, primary studies and ACP’s illustrative examples.

Start with the work, then define the question

A roof alteration, a new access road and floodlighting beside woodland raise different questions. Therefore, begin with drawings and a clear description of the work. Include access, scaffolding, temporary lighting, vegetation removal and the finished layout.

Next, bring together the desk study and site assessment. Consider known records, potential roost features and connected habitat. A lack of recorded bats does not establish that bats are absent.

The survey brief should then identify the missing evidence. For example, does a roof feature support a roost? Would a new light affect a used route? Is a retained tree genuinely outside the works?

Finally, consider design options before commissioning every possible survey. A change in layout may avoid an impact, but an ecologist must check what uncertainty remains. We explain the project route on our bat survey service page.

Bat survey methods: what each one can establish

These methods answer related but different questions. Combining them can strengthen an assessment, provided each has a defined purpose. Survey effort still needs a site-specific justification.

Compare survey evidence and limitations

Method comparison for understanding a brief. This is not a table of prescribed visit numbers.
MethodMain questionUseful evidenceImportant limit
Desk study & preliminary assessmentWhat could the proposal affect?Records, habitat context, potential features and an initial impact pathway.Old records and inaccessible areas leave gaps. No record is not evidence of absence.
Building or tree feature assessmentCould a feature support bats, and is there evidence of use?Feature descriptions, photographs, visible signs and access limitations.Concealed spaces may remain unexamined. Suitability and confirmed occupation are different findings.
Dusk emergence with night vision aidsDo bats leave a particular feature, and how is the roost used?Reviewed movement, access points, counts and supporting acoustic evidence.A passing bat is not necessarily emerging. Blind spots and missed events weaken conclusions.
Static acoustic recordingHow does recorded activity vary across locations and time?Time-stamped recordings and patterns of detectable activity.Passes are not individual bats. Equipment, placement and species affect detection.
Walked observations & acoustic transectsWhere and how are bats using the surveyed route?Field context, behaviour, direction and recordings along a planned route.The observer samples places at different times. A route does not cover every part of a site.
Targeted winter or swarming investigationDoes the site have a seasonal role that other visits cannot resolve?Season-specific evidence, using an appropriate specialist design.A summer result cannot settle a winter question. Access and disturbance risks can restrict methods.
Specialist licensed methodsWhat important uncertainty remains unresolved?For example, individual movement information from justified radio-tracking.Trapping, handling and tagging need competence, appropriate permissions and a clear welfare justification.

Daytime assessment gives the night survey its focus

Buildings: map the feature and the impact

A Preliminary Roost Assessment examines accessible parts of a structure and the evidence they contain. However, a clean floor or an apparently empty loft does not settle the use of every concealed space.

A useful feature record links a location, photograph and description to the proposed work. It also explains what the ecologist could not inspect. That record helps the team position cameras and observers later.

If the plans change, revisit the connection between each feature and the work. A survey design should not remain fixed to an obsolete drawing.

Trees: think in three dimensions

A ground assessment may identify potential roost features, but foliage and height can obscure their details. Further assessment depends on the feature, access, competence and the likely impact.

Trees can also form part of a wider roost network. Therefore, consider neighbouring trees and habitat connections when interpreting a single visit.

Our bats in trees guide explains the distinction between tree-level assessment and feature-level suitability. It also covers practical design and tree-work considerations.

Emergence evidence: link the bat to the feature

An emergence survey investigates bats leaving a roost. The strongest observation connects an animal’s movement to a particular access point. A detector recording near a building, by itself, does not establish that connection.

Once a roost is confirmed, the question may change. The project may need evidence about species, numbers, seasonal use and roost function. Additional work should address those gaps rather than repeat an unchanged brief.

The fourth edition no longer recommends routine dawn re-entry visits for presence or likely-absence surveys. Bats may return before the observation period. However, a justified re-entry survey can still help locate access points or characterise a known roost.

Counts also need care. Bats can circle, re-enter or leave through several openings. The report should explain how the reviewer handled these events and any uncertainty.

Infrared, thermal and night vision: the important differences

“Night vision aid” describes a purpose, not one interchangeable technology. Choose a system that can record the relevant event under the conditions expected on site. Then test the complete setup, including lenses, illumination and recording settings.

Near-infrared video

An infrared-sensitive camera records reflected light. Suitable infrared illumination can make an exit and the surrounding structure visible after dark. A red filter over a visible torch is not the same thing.

However, uneven illumination, nearby leaves, focus and exposure can hide a small moving animal. A bright foreground does not prove that a distant roof edge is adequately lit.

Check: the actual feature at the darkest stage, the useful field of view and the quality of recorded movement.

Thermal imaging

A thermal camera records differences in emitted infrared radiation. It can help detect a moving animal against a contrasting background without illuminating the scene with a near-infrared lamp.

However, thermal contrast, resolution, lens choice and distance still matter. A small warm shape may be detectable without supporting species identification.

Check: whether the exit and flight path remain interpretable. Ordinary glazing, walls and roof coverings do not become transparent to a thermal camera.

Equipment supports fieldcraft

BCT’s fourth edition expects night vision aids for emergence work in most circumstances. Any departure needs a reasoned explanation. Its 2026 overview also stresses understanding equipment limits and retaining field skills.

Therefore, cameras do not create an automatic entitlement to reduce staffing. The proposed coverage and recording quality must support that decision.

Research: useful, with boundaries

Mitchell and colleagues compared counts at four Scottish soprano pipistrelle maternity colonies. Both infrared and thermal playback improved detection relative to naked-eye counts. Thermal performed better than infrared during the darkest interval they examined.

This supports the value of reviewed footage. It does not establish that every thermal camera outperforms every infrared system at every roost.

A wide camera view can still leave a critical gap

Coverage is about the exit, not the roof area
Camera coverage: a visible roof does not mean complete coverageIllustrative plan of an L-shaped building. Camera A covers part of the southern edge. Camera B covers the eastern edge. A hatched northern edge remains outside these example views. Camera numbers and cones are illustrative, not a survey specification.PLAN VIEW · FIND THE MISSING VIEWBuildingroof outline123Uncovered edgeCamera ACamera BColoured cones = example views, not detection ranges
Read the diagram: features 1 and 2 lie on edges facing the example cameras. Feature 3 remains outside those views. A real design must resolve such gaps. The cones are schematic and do not represent tested detection ranges.
© 2026 ACP Consultants Ltd.
Original educational diagram

Test the evidence you need to capture

First, map the potential access points and the surfaces around them. Then ask whether each relevant event would be visible. A camera facing most of a building may still miss a small recess, roof junction or rear elevation.

  • Geometry: check corners, overhangs, foliage and objects in front of the feature.
  • Image quality: check focus, motion blur, contrast and the size of the target in the recording.
  • Continuity: verify power, storage, recording duration and coverage when equipment moves.
  • Evidence: retain the view and settings needed to explain what the system could observe.

BCT specifies a still image at the darkest point to demonstrate field of view and suitable illumination. For infrared work, that is more informative than a bright setup photograph.

Also review the recording itself. A still image cannot prove that a fast-moving bat would remain interpretable throughout its movement.

Practical decision: reposition equipment, add coverage or revise the method where necessary. If a gap remains, state its effect on the conclusion. Do not describe unobserved features as surveyed.

Activity surveys: sample habitat use across space and time

Place detectors to answer a question

A static detector samples the acoustic activity it can detect at its location. Meanwhile, a walked survey adds observations and context along a route. Both need a design that reflects the habitats and impact under investigation.

For example, a new crossing through a hedgerow raises a different sampling question from a lighting change beside a pond. Record why each station or route contributes to the assessment.

  • Map each position, orientation, height and nearby obstruction.
  • Record detector and microphone details, settings and operational checks.
  • Compare usable recording periods and explain lost nights or failed equipment.
  • Consider night-to-night variation and seasonal differences.

Froidevaux and colleagues compared sampling schemes in Swiss forests. Sampling different forest layers and the full night detected a wider assemblage than restricted approaches. The study supports attention to habitat complexity and timing.

However, its particular station numbers and effort estimates are not universal requirements for UK development sites.

Different settings, different sampling questions
Sampling habitat use: compare locations and recording effortIllustrative landscape with woodland, a hedgerow, a pond and a proposed works area. Three example static detector stations sample different habitat contexts. A walked route provides observations between points. The layout is not a prescribed number of stations or a prediction of flight routes.LANDSCAPE VIEW · SAMPLE THE QUESTIONABCWoodlandHedgerowPondProposed worksWalked route+ static recordings A–CIllustrative habitat sampling; no assumed flight lines
Read the diagram: A samples a woodland edge, B a hedge connection and C the pond context. The walked route adds observations between locations. Actual placement, timing and effort require a site-specific design.
© 2026 ACP Consultants Ltd.
Original educational diagram

Activity is not an abundance count

One bat may generate many passes, while another may pass beyond the microphone’s effective range. Quiet calls, clutter and call direction also affect detection. Therefore, a busier recording does not directly prove that more individual bats were present.

Comparable effort matters

Define the recording unit and the usable survey period before comparing results. For example, report a known device failure separately from a valid period with no detections. Our acoustics guide explains call interpretation and detection limits in greater depth.

Timing, weather and seasonal questions change the design

Match the visit to the purpose

A daytime assessment and a maternity-roost investigation do not share the same timing needs. Winter use and autumn swarming raise further questions. Therefore, define the seasonal evidence required before fixing a programme.

Use our bat survey season guide and season planner for the project calendar. For winter questions, see hibernation surveys.

Record conditions and their consequences

Weather affects bat activity and the performance of a survey. Record temperature, wind and rain, together with changes during fieldwork. For unattended recording, identify the weather source and its relevance to the site.

If conditions or access weaken the evidence, explain the impact. A completed calendar slot is not automatically a satisfactory survey.

There is no single visit count that suits every question on this page. The competent ecologist should justify effort against current guidance, roost suitability, species, habitat, proposed impacts and limitations. A deviation should explain both the reason and the consequences for confidence.

Make field notes, audio and video work together

One event needs a traceable record
Three records, one checked timelineIllustrative data reconciliation. A video clock is two seconds ahead of a reference clock. The video event at 21:14:06 aligns with audio and a field note at 21:14:04 after correction. Matching time alone does not prove that an acoustic sequence belongs to the bat seen.EVIDENCE VIEW · CHECK CLOCK OFFSETSAudio21:14:04Video21:14:06Field note21:14:04Video clock +2 s✓Aligned reference time: 21:14:04Then check location, movement and call qualityInvented teaching example · not ACP field evidence
Read the diagram: the video clock is two seconds ahead. Correcting that offset aligns the example event with the reference time. This is invented teaching data, not a recording from an ACP project.
© 2026 ACP Consultants Ltd.
Original educational diagram

Keep the original evidence and the review trail

Give each visit, station, feature and recording a stable reference. Before surveying, check device clocks against an agreed time source. Also record the time zone and any offset or drift found later.

Then keep original files separate from working copies. A review log should connect each important observation to its source file and time. It should also record who reviewed it and what remains uncertain.

A matched timestamp is useful, but it does not prove that one call belongs to one visible animal. Several bats may be present. Check location, movement, call quality and the timing limits of each device.

Review recordings, not just software labels

Automatic acoustic classifications are suggestions that need appropriate review. Inspect material that could change the assessment, including unusual records and uncertain sequences. Likewise, movement alerts in video are a screening aid, not a complete ecological interpretation.

Describe the review process and its limits. A report should not imply that every file received the same scrutiny if it did not.

Agree storage and retention at the outset

BCT recommends an organisational retention policy linked to the project’s planning, development and monitoring stages. Active licences or enforcement matters may create additional requirements. Check the actual conditions that apply.

Agree secure storage, backup, access and any handover arrangements. Do not assume that a universal number of years covers every project.

No detection is a result; it is not automatically absence

The probability of recording a bat depends on more than whether bats use the site. It also depends on their activity during the visit and the method’s ability to detect it.

MacKenzie and colleagues formalised this distinction in occupancy analysis. Repeated observations can help estimate detection and occurrence, but only within a suitable statistical design. Their method is not a shortcut for certifying an individual development site.

In practice, explain which features, times and conditions the result represents. If a camera stopped or a feature remained hidden, that gap affects the strength of the finding.

Also separate identification confidence from detection confidence. A recording can establish bat activity while leaving the species unresolved. Group-level identification is often more defensible than a precise but unsupported label.

Specialist methods need a defined purpose and competence

Licensing and welfare

Not every non-intrusive bat observation requires a survey licence. However, activities that would otherwise cause a protected-species offence require the relevant authorisation. The method, species and circumstances matter.

For example, England’s level 1 class licence has a defined scope. It does not authorise every inspection technique or work with hibernating bats. Check current licence terms and the surveyor’s competence before intrusive work.

Choose the method for the setting

A 2022 study compared infrared video, light barriers and visual counts at three greater mouse-eared bat maternity roosts. The authors found that practical requirements and the monitoring purpose influenced method choice.

That is a useful lesson in matching tools to a question. It does not make light barriers a routine requirement for British building assessments. Similarly, trapping or radio-tracking needs a specific justification.

Wind-energy projects, major infrastructure, underground sites and long-term population monitoring can require specialist protocols. This general guide does not replace those project-specific frameworks. Our bridges, culverts and underground structures guide explains the particular features, access constraints and development questions in those settings.

What should a well-evidenced bat survey report explain?

A reader should be able to follow the route from the proposed work to the recommendation. The report needs enough detail to make that reasoning reviewable, without burying the decision in unexplained recordings.

1. Purpose and current plans

Identify the site, drawings, proposed activities and questions. Explain which decision the survey supports and what lies outside its scope.

2. Methods and effort

State the guidance used, dates, timings, personnel, equipment and settings. Explain survey effort and any departure from the usual approach.

3. Coverage and conditions

Show relevant features, observer and equipment positions, views and access constraints. Record weather, interruptions and failures alongside their consequences.

4. Results and review

Separate direct observations, acoustic identifications and interpretations. Link important findings to photographs, recordings or other evidence that a reviewer can trace.

5. Confidence and impacts

Explain uncertainty and assess the proposal against the findings. Do not use a generic limitation paragraph to avoid discussing a material gap.

6. A practical next step

Set out design options, any further evidence, and relevant mitigation or licensing requirements. Identify responsibilities and the points that need checking as the project develops.

Before commissioning, ask whether the fee includes recording review and a report that answers the agreed questions. Also confirm access requirements, realistic timing and how additional work would be justified.

Professional bat survey checklists and record templates

Good methods need usable records. These original ACP forms help the survey team carry a clear question from planning through fieldwork to review. Each checklist has a linked record page, so an open issue can lead to a named action.

The complete field and data-quality pack

Three printable PDFs, three editable offline forms, five CSV logs and a field dictionary. Version 1.0 · checked 16 November 2026.

01

Before deployment

Plan the survey

Agree the question, map coverage and resolve access, competence and data arrangements before deployment.

  • Question, drawing and method rationale
  • Feature coverage, access and safe working
  • Competence, permissions and data arrangements
02

During the survey

Record the field evidence

Connect each observation to its feature, device, time, conditions and usable recording effort.

  • Device settings and clock checks
  • Weather, visibility and usable effort
  • Observations linked to source files
03

After the survey

Review and hand over

Preserve originals, review the evidence and state what the findings can support before handing over.

  • Originals, review decisions and uncertainty
  • Evidence checks and report limitations
  • Secure handover and retention arrangements

Choose the format that fits the task

Use the PDFs for paper records. Alternatively, open an HTML form from the ZIP in a browser and type into it. Select Export completed record to save your entries as a JSON file. Reopen the form and load that file to continue.

The forms work locally and send no entries to ACP. Keep completed files securely. The CSV templates support longer station, clock, effort, event-review and handover logs; the dictionary explains every field.

Read the complete checklist prompts on this page

Plan the survey

  1. Define the decision. Record the survey question, proposed works, current drawing revision and relevant impact pathways.
  2. Review the starting evidence. Identify records, assessments, features, habitats and remaining uncertainty. Record source dates and access limits.
  3. Set a justified method. Record the applicable guidance, edition and any specialist protocol. Explain method, timing and effort; justify departures.
  4. Map the coverage. Give features, stations and routes stable IDs. Mark views, occlusions, access restrictions and how each question will be covered.
  5. Confirm people and permissions. Name the lead and review roles. Check competence, access consent and any licence or supervision requirements for the chosen activity.
  6. Agree safe working. Complete the site risk assessment, communications and check-in arrangements. Include lone working, roads, water, structures and rest where relevant.
  7. Prepare equipment and contingencies. Allocate devices, batteries, storage and spares. Agree equipment tests, failure responses and conditions for stopping or rescheduling.
  8. Plan evidence management. Agree file naming, time reference, backup, reviewer, secure access, retention and handover. Record privacy and sensitive-location restrictions.

Record the field evidence

  1. Confirm the brief on arrival. Record survey ID, date, team and drawing revision. Note any change to the site, works, access or planned coverage.
  2. Identify every device. Record camera, detector, microphone and memory-card IDs, model and relevant settings. Retain photographs or exported configurations.
  3. Check clocks against one reference. Record timezone and UTC offset, reference source and device minus reference time at the start and end. Keep original timestamps.
  4. Test the intended coverage. Check focus, field of view, near-infrared illumination where used and obstruction at relevant features. Record test evidence and any gaps.
  5. Confirm recording and detectability. Check audio/video files, microphone condition, levels and storage. Record settings and test results; a test does not prove all bats will be detected.
  6. Log conditions and changes. Record relevant weather with units, observation times and source/location. Note visibility, lighting and their effect on the survey.
  7. Keep observations and interruptions. Log feature, time, direction and evidence separately from interpretation. Record device stoppages, changes, occlusions and missed intervals.
  8. Close the session deliberately. Record end times and final clock checks. Confirm files exist, capture unresolved issues and notify the lead about gaps requiring a decision.

Review and hand over

  1. Secure the original evidence. Inventory source files, notes, maps and configurations. Verify transfer and backup; preserve originals separately from working copies.
  2. Reconcile times and identifiers. Link station, feature, device and file IDs. Document clock corrections and unresolved drift without overwriting original timestamps.
  3. Review footage promptly. Record reviewer, dates, software and review method. Explain how footage and audio were checked and how missed-event risks were addressed.
  4. Resolve labels against evidence. Keep automated classifications as provisional. Record manual decisions, confidence, unresolved identifications and the basis for changes.
  5. Audit usable effort. Retain failed sessions and interruptions. Separate zero detections from missing or unusable evidence; state inclusion rules and denominators.
  6. Review coverage and inference. Identify blind spots, weather, access and equipment limitations. Explain consequences for each question and decide whether further evidence is needed.
  7. Check the report and drawings. Cross-check counts, feature references, plan revisions, methods and conclusions. Name the checker and record changes and outstanding actions.
  8. Agree a traceable handover. Record recipients, files, versions, restrictions, backup and retention review arrangements. Confirm receipt and keep the decision trail with the data.

Detailed bat recording forms and a drawing tool

Choose the record for the task. Use the building PRA for inspection findings and the quick observer sheet for night-survey directions, activity tallies and exact-time events. The tree and emergence control packs keep the wider assessment and evidence trail together.

Quick observer sheet

Direction arrows, all 18 species plus group codes, ten-minute activity tallies and exact-time exit/entry events.

Original ACP sample · Instructions included

Quick records, clear meanings

The observer sheet offers eight travel directions or drawn arrows, all 18 species codes and group/unknown options. Add another row when the taxon, behaviour, count unit or direction changes.

CP Common pipistrelleMY Myotis speciesUN Unknown bat

Ten-minute boxes organise activity. They do not set survey duration or count unique bats. Record possible or confirmed emergence and re-entry separately, at their original times.

Instructions with every resource

  1. Read the task-specific steps, code key and limitations.
  2. Enter matching project, visit, station and feature references.
  3. Keep blank, zero detection and no survey effort distinct.
  4. Save the editable record, reopen it and inspect the export.
  5. Retain original observations and later review separately.
Read the instructions and worked example

Draw survey positions and activity paths

Draw buildings and freehand outlines, place surveyors or cameras, set viewing arrows or sectors and annotate activity paths. Import a plan or sketch as a background and trace it manually.

Every station and route can carry a label and evidence reference. The fictional example helps you try the controls. Intended views do not prove detection coverage; the tool does not reconstruct trajectories or identify bats.

Save and use the complete pack

Download four fillable PDFs, the digital forms, instructions and drawing tool. Extract the ZIP and open its index file. Add recording rows and named notes boxes in the quick observer sheet when the project needs them.

Save editable records as JSON. Export activity and exact-time events separately; retain the original files. Survey contents and editing activity are not uploaded by these tools.

Download the forms and drawing pack

ACP branding, version and source travel with the templates. The actual surveyor remains responsible for findings. Existing checklist permissions remain unchanged.

Which sheet has the arrows and ten-minute tally boxes?

Use the quick observer sheet. It is the night-survey recording companion to the detailed emergence control and review pack. The building PRA records inspection findings.

Can I add fields and use the forms on paper?

You can add repeated records and, in the quick observer sheet, extra named notes boxes. The PDFs have fillable fields and can be printed for handwriting. Use a continuation page for long entries; check that all text is visible before sharing.

Keep clocks, coverage and recording effort connected

A useful record tells a reviewer which device observed which feature, and when. Otherwise, two clips of one event can look like separate events, or a silent file can be mistaken for a complete survey.

One event, three displayed times
Reference clock20:15:00Shared time
Record the source and timezone
CAM-A20:15:088 seconds ahead
Subtract 8 seconds to align
DET-B20:14:573 seconds behind
Add 3 seconds to align
Invented example. Offset = device time minus reference time. Aligned time = original device time minus offset. Record the date, timezone and UTC offset too.
© 2026 ACP Consultants Ltd.
Original educational diagram

Check clocks at both ends of the visit

Use a common reference and record each device’s offset at the start and end. Keep original timestamps. Apply any alignment to a working copy or a separate review field, with the correction recorded.

If offsets change, investigate drift or a clock adjustment. Do not assume a constant correction. Record the remaining timing uncertainty, especially when it could change an emergence count or the link to a particular feature.

Record the gap and its consequence

Suppose CAM-A stops for 12 minutes during an invented 120-minute interval. Feature F01 has no equivalent visual coverage during that gap. The remaining camera record contains 108 usable minutes.

The detector continues recording, but audio cannot show the missing exit point. Therefore, retain the outage in the record and ask the lead ecologist whether the original question remains answerable.

For calculations, do not subtract overlapping outages twice or add simultaneous camera views as extra survey duration. A usable-time total and adequate feature coverage are separate checks.

A recording gap changes the evidence
120 minPlanned interval
12 minCamera unavailable
108 minUsable camera record
Illustrative arithmetic only. The duration is not a recommended survey length, and 108 usable minutes do not prove adequate coverage.
© 2026 ACP Consultants Ltd.
Original educational diagram
Weather is evidence with a location. Record relevant conditions, units and times. If readings come from elsewhere, state the source, distance and limitations. The March 2024 amendments do not impose a universal on-site weather-station requirement.

Make review and handover useful to the next ecologist

Preserve observations before interpretation

Record what was seen or heard separately from the proposed identification. For example, “bat crossed the view” does not establish emergence from F01. Keep unresolved labels at the level the evidence supports.

Record the review method, software version, reviewer and date. Explain how video coverage was checked. Audio-triggered review alone may miss a bat that did not echolocate; automated labels also require appropriate review.

BCT’s March 2024 amendment says footage should be reviewed as soon as possible after the survey. The pack therefore records the review date and any relevant delay, without presenting a next-day deadline as a universal rule.

Keep the observation and the decision traceable
  1. 01 · Original evidenceFile, notes, feature and device ID
  2. 02 · Review recordReviewer, method, label and uncertainty
  3. 03 · Report decisionWhat the evidence supports and what remains open
The links should work in both directions: from a report conclusion back to the supporting record, and from an unresolved event to its follow-up action.
© 2026 ACP Consultants Ltd.
Original educational diagram

Keep missing evidence visible

Retain failed visits and unusable intervals in the audit trail. Distinguish them from a valid observation with zero detections. Explain the inclusion rule before comparing activity rates.

Our practical bat data analysis resource shows how to retain failed nights, calculate activity per valid recording hour and explain uncertainty.

Agree the handover and retention

List the report, drawings, data, original recordings and review records that the recipient needs. Record versions, restrictions, secure transfer and acknowledgement.

Agree the retention period and its basis for the project. Name the custodian and review date; do not assume one duration fits every contract, licence or evidence need.

These are original ACP recording aids. You may copy and adapt them for your project, retaining the source and version and identifying changes. An adapted form must not imply ACP endorsement. Third-party guidance keeps its own rights.

Good survey work should help shape a better proposal

Evidence should lead to useful advice. If a design can retain a roost feature, preserve a dark connection or move disruptive work, discuss that option early. Then test whether it actually avoids the impact.

However, avoidance needs a credible design and delivery plan. Retaining a roof on a drawing does not help if scaffolding blocks access or new lighting changes its use. Construction details therefore matter alongside the final layout.

Where mitigation is necessary, use the findings to design it around the species and roost function. Our bat mitigation and roost design guide explains that process. Post-development monitoring then tests the relevant outcomes.

Bat survey guidelines and methods: frequently asked questions

What are the current bat survey guidelines?

BCT’s fourth edition, published in 2023 and amended in March 2024, remains the main professional survey reference. A separate night vision aids technical guide followed in 2026. Ecologists should also check current planning advice, licence conditions and any specialist protocol relevant to the project.

Do guidelines prescribe the same surveys for every site?

No. Survey design depends on the question, the features and habitats, the proposed impacts and the evidence already available. The ecologist should justify effort and explain departures from guidance. A table entry alone is not a complete survey brief.

Does every potential roost feature need an emergence survey?

Not automatically. The appropriate next step depends on the feature, existing evidence and the proposal’s effects. A competent ecologist should explain whether further assessment is needed. Design changes may alter that need, but they do not automatically remove uncertainty or legal duties.

Are infrared and thermal cameras the same?

No. Near-infrared video uses reflected light and usually needs suitable illumination in darkness. Thermal cameras detect emitted infrared radiation. Both have limits involving the scene, settings, distance and resolution. Neither provides species identification or complete coverage simply by being present.

Can a thermal camera see bats through a roof?

No. A thermal camera does not see through ordinary roof coverings or walls. It may reveal surface temperature patterns, but those patterns alone do not establish that bats occupy the space behind them.

Can cameras replace surveyors?

Appropriate equipment may support a different staffing arrangement, but the team must demonstrate adequate coverage and reliable evidence. Equipment setup, field observation and recording review still need suitable competence. There is no universal camera-to-surveyor ratio.

Can I download a professional bat survey checklist?

Yes. The field and data-quality pack on this page includes three printable checklists, editable offline forms and CSV recording logs. They cover planning, field evidence and review. A competent ecologist must adapt them to the site, current guidance and the survey question.

Are dawn re-entry surveys still used?

BCT’s fourth edition no longer recommends them routinely for presence or likely-absence work. However, a justified re-entry survey can help investigate access points or characterise a known roost. Its timing and limitations need explicit consideration.

Does a detector show how many bats are present?

A detector records calls within its effective detection area. One bat can generate many passes, and some bats are harder to detect than others. Therefore, acoustic activity is not a direct count of individuals.

How should a failed recording affect the report?

Record when and where the failure occurred, what evidence remains and whether the gap affects the conclusion. The ecologist should then decide whether replacement effort or another method is needed. A failed period should not be treated as a valid period with no bats.

How long should survey recordings be kept?

Use a documented retention policy that reflects planning, development and monitoring stages. Also check any licence conditions or other project requirements. Agree storage, backup and access arrangements at the start. A single blanket retention period will not suit every project.

Does every bat survey need a licence?

No. Some non-intrusive observation can take place without a survey licence. However, methods that would otherwise cause a protected-species offence need the appropriate authorisation. The surveyor must also have suitable competence; a licence does not cover every technique or situation.

Can ACP review the design before further survey work?

Yes. We can discuss the proposed work and available evidence, then consider whether design options could avoid or reduce effects. Any revised survey scope must still address the relevant uncertainty and support a lawful, deliverable proposal.

Do completed checklists prove that a survey is adequate?

No. They organise evidence and decisions; they do not set survey effort or certify an absence of bats. The lead ecologist must assess coverage, conditions, usable records and remaining uncertainty. Keep failures and unresolved actions visible in the report.

Guidance, research and further reading

ACP diagrams and example records on this page are original teaching material. They are not actual site plans, survey results, manufacturer performance claims or prescribed equipment layouts. Source publications retain their own rights.

Turn the right evidence into a clear next step

Share the drawings, proposed work and any existing ecological report. We can help clarify the survey question and discuss proportionate options.